Holding Russkaya Trapeza > Packaging Machine Sbi 260 (200)-Business

Packaging Machine Sbi 260 (200)-Business

Фасовочно-упаковочное оборудование: Машина упаковочная Sbi 260-Business

Functionality:

This machine is designed for packaging of wide range of food and non-food products.

Technical data:

Data item

Value

Kinematical capacity, packs/min, up to

120

Capacity with product (depending on dose and product type),  packs/min *

90

Bags size, mm:

length (per 1 cycle)

width

50…400

60…260

Rated values of alternate electrical current consumption:

- supply voltage, V

- current frequency, Hz

220

50

Installed power, kW, max

2,5

Air consumption, l/min, max

500

Air pressure (in pneumatic system), MPa

0,6

Dimensional sizes (L х W х H), mm, max

2300х1300х1600

Weight, kg, max

600

Packaging material:

- type

- thickness, micron

Thermo-sealing films

20-100

Heating elements type

with constant heating

Sizes of films bobbin, mm, max:

- width

- outer diameter

- inside diameter of bushing


560

400

76

*- Production capacity depends on product characteristics, packaging material, type of dosing unit, dosage amount.

Standard configuration:

  • Film feeding unit with motorized unreel of bobbin.
  • Modular forming device consisting of cylindrical pipe, collar with mounting plates and attachment with 2 nibs.
  • Horizontal seam sealing unit with constant heated jaws, with one thermo-dater for 6 symbols. Thermo-dater in horizontal seam (one line, six symbols).
  • Bag cutting unit with drive unit with two pneumocylinders.
  • Unit for vertical seam sealing with bag perforation.
  • Shute for product output with adjusted overhang, height and tilt angle
  • Electric cabinet with sensor control panel.
  • Photosensor «Omron» for operation on printed photo-mark.
  • Two detectors of film ending for cases when film is stuck together with bushing or not.

Options:

  • Unit for sealing 4 sides of bag
  • Flat-bottom bag forming device
  • Unit for punching three holes for fingers
  • Briquettes forming device
  • Automatic centering of packaging film
  • Replaceable forming devices
  • External  devices for application of information on a package (thermoprinters, applicator)
  • Device for putting advertising tape on bag
  • Inert gas injection system
  • Euroslot device
  • Dust extraction system
  • Table for sticking packaging film when replacing bobbin. Excludes operation of leading-in packaging film to a collar during installation of a new bobbin.
  • Unit for air-cooling of horizontal seam of bag
  • Foam air-press devices
  • Compensator of bags length (when thermo-printer is installed)
  • Dust-proofing of mechanical elements

Advanced software capabilities allow installing such optional equipment as briquette-maker, gas-analyzer, clipper etc.